Vacuum Cleaner Simulated Walking Life Tester
The Vacuum Cleaner Simulated Walking Life Tester is designed for long-term life-cycle aging and durability testing of vacuum cleaners on different floor surfaces. You use this system to simulate extended walking conditions by allowing the vacuum cleaner to perform linear reciprocating motion over configurable test flooring. With PLC control and a servo-driven transmission mechanism, the tester delivers stable, repeatable movement at preset speeds and cycles, enabling reliable evaluation of product durability under realistic operating conditions.
Applications
Upright vacuum cleaners
Canister vacuum cleaners
Floor brush assemblies and complete vacuum units
Vacuum cleaners used on carpet, hard flooring, tiles, and similar surfaces
Standards
(1) IEC 60335-1 Household and similar electrical appliances – General requirements
(2) IEC 60335-2-2 Safety of vacuum cleaners and water-suction cleaning appliances
(3) ISO 16750 Mechanical load and durability testing concepts
(4) GB/T standards related to household appliance durability testing
Technical Parameters
| Item | Specification |
|---|---|
| Test Stations | 2–12 stations; dimensions determined by number of stations |
| Test Voltage | AC: 0–300V, 0–30A; DC: 0–36V, 0–20A |
| Effective Travel of Test Table | 100–800 mm (adjustable) |
| Speed of Test Fixture | 450–800 mm/s (adjustable) |
| Test Settings | Test count: 0–999999; test interval: 0–99999 s |
| Test Modes | Time on/off setting, current detection, interval time testing |
| Drive Mode | Servo motor reciprocating drive mechanism |
| Power Supply | 220V 50Hz, 4.5KW |
Features
Simulates long-term walking motion of vacuum cleaners on different floor materials
Supports flexible test surface configuration such as carpet, hard flooring, and tiles
Servo-driven reciprocating mechanism ensures smooth and stable motion
PLC control enables precise speed, stroke, and cycle management
Multi-station design improves testing efficiency
Simple operation with reliable performance and low failure rate
Accessoriess
(1) Test platform for floor material placement
(2) Vacuum cleaner fixing fixtures
(3) Servo drive system
(4) PLC control unit
(5) Operation and maintenance manual
FAQ
1. What types of floor surfaces can be used for testing?
You can use carpet, hard flooring, tiles, or other materials that simulate real application environments.
2. How many vacuum cleaners can be tested at the same time?
The system supports 2 to 12 test stations, depending on the configuration.
3. Is the walking speed adjustable?
Yes. The reciprocating movement speed is programmable within the specified range.
4. Can the tester run long-term aging tests automatically?
Yes. The PLC control system allows unattended operation with preset cycles and intervals.
5. Does the tester support electrical monitoring during testing?
Yes. It supports current detection and time-based on/off test modes.
6. Is the equipment suitable for different vacuum cleaner models?
Yes. Adjustable fixtures and customizable dimensions allow testing of various vacuum cleaner designs.
Leave Message Get Price
