Testing Operation of xenon lamp chamber

The operation of the xenon lamp chamber is extremely simple. Specially designed sample racks make sample fixation and evaluation very simple. Programming more intuitive, all models of equipment are fully automatic, in the case of unregulated 24 hours a day, 7 days a week continuous operation.Sample installation:The test sample in the test chamber is fixed on an approximately horizontal plane. This flat sample is placed in a flexible manner and can test many samples of different sizes, shapes and types. use a rotating frame to place the sample vertically. This configuration is ideal for testing thinner, flat samples (such as textiles, paints and coatings). The standard sample racks are available in a variety of sizes for different samples. For bottles, textile testing, etc. can also choose a special sample rack.

Program settings:Based on a practical and easy-to-use design, the controller can be programmed in five selectable languages (English, French, Spanish, Italian, German). The user can program up to 10 test cycles in a memory with a power-down backup function.

In the case of radioactivity:Users need to regularly calibrate the airborne SOLAR EYE radiation sensor for the test chamber to ensure accurate results. Calibration with the CR20 irradiance calibrator The chamber is simple and takes only a few minutes. It should be noted that the CR20 is equipped with 340nm, 420nm or 300-400nm (TUV) sensors. The sensor must match the sensor type and filter type actually used in the XE-3 test chamber. The CR20 irradiance calibrator is required to be returned to once a year for calibration, which is not expensive. Our calibration laboratories have been certified by A2LA and UKAS (ISO 17025).

Temperature:The blackboard temperature sensor and optional inbox air temperature sensors for the test chamber are also subject to periodic calibration by the user. Calibration with the CT202 Temperature Calibrator The chamber is simple and takes only a few minutes. It is important to note that the CT202 temperature calibrator is equipped with a non-insulated blackboard (CT202 / BP) or insulated blackboard (CT202 / IBP) sensor. The sensor must match the sensor type actually used in the XE-1 test chamber. The air temperature sensors in the Xe-2 and Xe-3 are inexpensive and need to be replaced once a year. The CT202 thermometer needs to be returned to once a year for recalibration, which is not expensive.

Relative humidity: models with relative humidity control. These models simultaneously control, monitor and display relative humidity, blackboard (black mark) temperature and air temperature inside the box.

2017-10-27 13:57