Automatic Bursting Strength Tester working parameters

The Automatic Bursting Strength Tester can be used to measure the breakage resistance of all kinds of cardboard, single and multi-layer corrugated cardboard as well as non-paper materials such as silk and cotton.

Automatic Bursting Strength Tester parameters:

Sensing mode: pressure converter

Saving result: with printing function, 10 sets of data can be printed and the average value is calculated automatically

Display mode: HD LCD display, digital A/D value rate 100 times/sec, high testing accuracy

Power unit: kg force/cm2, lb/cm2, kPa (with unit conversion function)

Measuring range: 250 to 6000 kPa

Power: 1 kPa

Measuring accuracy

Indication error: better than 1% fs

Indication variability: better than 1%

Oil pressure speed: 170±10 ml/min for high pressure types

Adhesive film resistance: 10 mm bump, 170 kPa to 220 kPa, 18 mm bump, 250 kPa to 350 kPa

Clamp material: stainless steel

Clamping force: > 690 kPa (adjustable)

Inner diameter of upper clamping ring bore: phi (31.5±0.05) mm

Inner diameter of lower clamping ring bore: phi(31.5±0.05)mm

Upper chuck diameter: 95 mm

Lower chuck diameter: 135 mm

Hydraulic fluid: silicone oil

Volume: 430 * 530 * 520 mm

Large volume: approx. 70 kg

Power supply: 1∮,AC220V

Standard configuration: 5 rubber plates, 1 spanner, 10 correction plates, 1 bottle of silicone oil

Automatic Bursting Strength Tester operation method:

Just put the material in, i.e. automatic detection, automatic test, automatic oil pressure return, automatic calculation, storage of test data and printing, the instrument will display digitally and can print test results and data processing automatically.

Standards :

gb/t1539, jis iso2759-2001 l 1004, l1018, astm d 2210, tappi t403

Environmental conditions for the normal operation of the Automatic Bursting Strength Tester:

1. Room temperature: 20℃±10℃;

2. Power supply: AC220V 22V, 50Hz, zui large current 5A, reliable power grounding. If the power supply voltage fluctuates beyond the above range, a power regulator should be used;

3. Clean working environment, no strong magnetic field and vibration source, smooth workbench.

2022-10-08 11:35