FAQ: What are the technical specifications of UV Accelerated Weathering Tester?
FAQ: What are the technical specifications of UV Accelerated Weathering Tester?
Different models of UV Accelerated Weathering Tester have different technical specifications, here is a brief analysis of QINSUN's ATLAS UVTest ™ UV weathering tester as a reference.

Technical parameters.
1, radiation uniformity: covering 4% of the entire sample surface
2, irradiance: minimum: 0.35 W/m2 (UVA, UVB) maximum: 1.55 W/m2 (UVA), 1.23 W/m2 (UVB)
3. Black plate temperature range: UVB stage - BPT 35-80 °C (95-176 °F) Condensation stage - BPT 35-60 °C (95-140 °F)
4、Sample capacity: 48 + BPT on 24 sample clips
5、Weight: 140KG (310LB) or so, depending on the options
6、Power supply.
120 VAC (± 10%), 1 Ph., 2 Wire (1/N/PE), 50/60 Hz, 12A230 VAC (± 10%), 1 Ph., 2 Wire (1/N/PE or 2/PE), 50/60 Hz, 8A
7、Spray water pressure: 25-40psi(1.7-2.7bar)
8、Condensate requirement
Pressure: 2-60psi(0.1-4.1bra)
Purity: Deionized water is recommended, but not required.
Conformity to standards.
ASTM D4329, ASTM D4587, ASTM D4799 , ASTM D5208, ASTM G151, ASTM G154 , EN 927-6, EN 1297 , EN 1898 FIBC, EN 12224 , EN 13523-10 , ISO 4892-1, ISO 4892-3, ISO 11507, ISO 11895, ISO 11997-2, SAE J2020, prEN 1062-4.
For more information about uv testing FAQ, we recommend:
What is uv testing?
how to check uv light efficiency?
2022-06-27 11:15