Fabric Drying Rate Tester
The Fabric Drying Rate Tester is an automatic testing instrument designed according to the requirements of AATCC 201 for measuring the drying rate of textiles. The instrument uses a controlled heating plate and airflow environment to evaluate the drying behavior of textile specimens, with automatic data saving and test curve display for convenient laboratory testing and analysis.
Application
Designed according to the requirements of the AATCC 201 Test Method, this instrument is an automatic testing device used for measuring the drying rate of textiles.
Applicable Standard
AATCC 201
Technical Specifications
Item | Specification |
Wind Tunnel | Capable of generating airflow of 0.2–3 m/s |
Heating Plate Size | 300 mm × 300 mm ± 1 mm |
Flexible Heating Sheet Size | 300 mm × 300 mm ± 1 mm |
Thermal Insulation Cork Board Size | 300 mm × 300 mm ± 1 mm |
Heating Plate Temperature | 37 ± 0.5°C (with over-temperature protection) |
Air Velocity | 0–2.5 m/s ± 0.1 m/s |
Infrared Temperature Sensor | 15–50°C ± 0.1°C |
Data Transmission | USB data transmission |
Test Interface | Displays curves and charts simultaneously |
Test Report | Automatic saving for convenient printing |
Power Supply | AC 230V, 50Hz/60Hz |
Dimensions | 450 (L) × 320 (W) × 170 (H) mm |
Weight | Approximately 45 kg |
Features
(1) Equipped with a large-size color touchscreen display.
(2) Supports bilingual operation with Chinese and English interface menus.
(3) Provides intuitive menu-based operation for convenient testing and data management.
FAQ
(1) What standard does the Fabric Drying Rate Tester follow?
The instrument is designed according to AATCC 201, which specifies the heated plate method for evaluating the drying rate of textiles. Laboratories using this method should also follow the specimen preparation, conditioning and test procedures required by the applicable edition of the standard.
(2) What is the purpose of controlling the heating plate temperature?
The heating plate provides the controlled thermal condition required by the test method. This instrument specifies a heating plate temperature of 37 ± 0.5°C and includes over-temperature protection, helping maintain stable conditions during textile drying-rate measurements.
(3) Can the instrument record test data automatically?
Yes. The test interface displays curves and charts simultaneously, while test reports can be saved automatically for later printing. USB data transmission is also provided, making it easier for laboratories to transfer and manage test results.
(4) What airflow range does the tester provide?
The wind tunnel is capable of generating airflow of 0.2–3 m/s, while the specified air-velocity measurement/control range is 0–2.5 m/s ± 0.1 m/s. The appropriate airflow condition should be selected according to the applicable AATCC 201 test requirements.
(5) How should I confirm the correct configuration before purchase?
The required test standard, specimen type and laboratory testing procedure should be confirmed before ordering. QINSUN instruments are calibrated and tested before shipment to help ensure measurement accuracy. For configuration recommendations, additional solutions and customer cases, contact QINSUN engineers.
Leave Message Get Price
