How to ensure the Quality of the corrugated Boxes
Corrugated Boxes. Most corrugated fiber board is made from cellulose fiber, or trees that are used for wood. However, at Peek Packaging, the majority of our corrugated boxes are made from 100% post industrial wood by-products. Quality of the corrugated Boxes is never about the high strength of the m...
04-18
DEVELOPMENT AND TESTING OF ABRASION RESISTANT HARD COATS FOR POLYMER FILM REFLECTORS
The desired ARC properties are high transparency and optical clarity, weatherability, abrasion resistance,strong adhesion to the base mirror film substrate, compatibility with high volume roll-to-roll production, and low material and manufacturing costs. A number of candidate ARC products such as UV...
04-17
The method Glass Screen Wear Resistance Testing
Due to the property of being optically transparent, glass is widely used in a variety of products, such as windows, containers, optical lenses, mirrors and countless others. During the manufacturing process, glass can be formed into different shapes, ranging from flat sheets to highly intricate shap...
04-17
Widely Applied Scratch Test
The scratch test has become one of the most widely applied methods to evaluate coating adhesion at present. Over the past two decades, this technique is extensively used to assess the adhesion of PVD/CVDdeposited superhard nanocomposite coatings, which usually exhibit a high residual stress at the c...
04-12
SCRATCH TEST METHODOLOGY FOR POLYMERS
A new scratch test methodology is developed here. Different test conditions are used in conducting the scratch tests. The results is compared and assessed to determine the best method. Results from a concurrent study using finite element analysis (FEA) will also be presented. Model Material System a...
04-10
EVALUATION AND QUANTIFICATION OF SCRATCH
The great attention paid on aesthetics of polymer surfaces in recent years has led to significant interests in the scratch resistance and visibility of polymers. To this end, reliable methods to quantify scratch resistance and visibility become the top priority. The methods used in the quantificatio...
04-10
The Trendency Of Current Testing Instruments Industry
Along with the development of science and technology now, instrument and meter industry in the development by leaps and bounds, coupled with the current progress and development of computer technology, network technology, to form a network and a practical monitoring system, can improve the productio...
04-04
Test Method for Abrasion Resistance of Organic Coatings
ASTM D406-This test method covers the determination of the resistance of organic coatings to abrasion produced by the Taber Abraser on coatings applied to a plane, rigid surface, such as a metal panel. This standard does not purport to address all of the safety concerns, if any, associated with its ...
03-29
Flammability of Polymers test
Most plastics are carbon-based materials and will burn and give off gases and smoke when subjected to a flame. Plastics are excellent fuels but are generally classed as ordinary combustibles and fall into the same category as wood, leather and many other common materials. All of these materials will...
03-29
Operating Method of Oxygen Index tester
This method describes a procedure for determining the relative flammability of organic films and reinforced composites by measuring the minimum concentration of oxygen in a gaseous mixture of oxygen and nitrogen that will just support combustion. It is based on ASTM Standard D2863-77 but modified to...
03-29