What are the standards that Taber Rotary Abraser 5135 & 5155 meets?

Taber Rotary Abraser 5135 & 5155The Taber Abraser (Abrader) has a wide range of standard applications and is used in a variety of industries including rubber, print, flooring, paint, textiles, automotive, aluminum, building materials, etc. Taber Abrasion Tester - 5135 is used to conduct accelerated abrasion and wear resistance tests on flat specimens. 

The following is a partial list of standards to which the Taber Abrasion Tester conforms：

AA-56032D "Trade Description Ink, Marking, Epoxy Base

ANSI / ISEA 105 "American National Standard Hand Protection Selection Criteria

ANSI / SAE Z26.1 "Safety Glass for Glazing Motor Vehicles and Motor Vehicle Equipment

ANSI INCITS 322 "Card durability test method

AS / NZS 1580.403.2 "Paint and Related Materials - Test Methods

AS / NZS 4266.20 "Recycled Synthetic Panels - Test Methods

AS 2001.2.28 "Test Methods for Textiles

ASTM B607 "Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Purposes

ASTM B733《Standard Specification for Autocatalytic Electroless Nickel-Phosphorus Coatings on Metals

ASTM B893《Standard Specification for Hard Coating Anodizing of Magnesium for Engineering Purposes

ASTM C1353《Standard Test Method for Determination of Abrasion Resistance of Walking Size Stones by Tabor Abrasion Instrument

ASTM C1803《Standard guide for determination of abrasion resistance of mortar surfaces by rotary platform abrasives

ASTM C501 "Standard Test Method for Determining the Relative Abrasion Resistance of Unglazed Porcelain Tile by Tabor Abrasives

ASTM C744《Standard Specification for Precast Concrete and Calcium Silicate Blocks

ASTM C957《Standard Specification for Elastomeric Waterproofing Membranes with Integral Wear Surfaces for High Solids Content Cold Liquids

ASTM D1044《Standard Test Method for Abrasion Resistance of Transparent Plastic Surfaces

ASTM D154《Guide to Abrasion Test for Varnishes

ASTM D2205《Standard Guide for the Selection of Tests for Traffic Coatings

ASTM D3389《Standard Test Method for Abrasion Resistance of Coated Fabrics Double Abrasive Head Rotary Abrasion Tester

ASTM D3451《Standard Guide for Testing of Powder and Powder Coatings for Paints

ASTM D3489《Standard Test Method for Microporous Polyurethane Materials

ASTM D3730《Standard Guide for Testing High Performance Interior Building Wall Coatings

ASTM D3794《Standard Guide for Testing of Coil Coatings

ASTM D3884《Standard guide to the double-ended abrasion test method for fabric abrasion resistance

ASTM D4060《Standard Test Method for Determining the Abrasion Resistance of Organic Coatings by Taber Abrasion Tester

ASTM D4685《Standard test method for pile retention of corduroy fabrics

ASTM D4712《Standard guide for the test of industrial water reducible coatings

ASTM D5144 "Standard Guide for Standard Use of Protective Coatings for Nuclear Power Plants

ASTM D5146《Standard Guide for the Test of Solvent-Based Architectural Coatings

ASTM D5324《Standard Guide for Testing of Waterborne Architectural Coatings

ASTM D6037《Standard Test Method for Dry Wear Damage Resistance of High Gloss Coatings

ASTM D7255《Standard Test Method for Abrasion Resistance of Leather Rotating Platforms by Double Abrasive Head Test Method

ASTM E1795《Standard Specification for Non-Enhanced Liquid Coated Encapsulated Products for Leaded Paint on Buildings

ASTM F1344《Standard Specification for Rubber Floor Tile

ASTM F1478《Standard Test Method Taber Method for Determination of Image Abrasion Resistance of Copiers and Printers

ASTM F1978《Standard Test Method for Measuring the Wear Resistance of Thermal Sprayed Metal Coatings with a Taber Abrasion Tester

ASTM F2051《Standard specification for implantable saline-filled breast prostheses

ASTM F2068《Standard Specification for Metal Implants for Femoral Prostheses

ASTM F362《Standard Test Method for Determining the Erasability of Ink Strips

ASTM F510《Standard Test Method for Determination of Abrasion Resistance of Resilient Floor Coverings by the Abrasive Additive Method

ASTM G195 "Standard Guide to Abrasion Testing with a Rotary Platform Abrader

Australian Department of Civil and Environmental Engineering Laboratory Tests for Strength, Hardness and Abrasion Resistance: An Annotation.

Blu-Ray Disc v1.2 "Blu-ray Disc Read-Only Format. Part 1: Basic Format Specification".

Boeing P.S. 13208 "Hard Coating of Aluminum Alloys

BS 3900 "Paints and Varnishes. Determination of Abrasion Resistance. Part 1: Rotary sandpaper covering wheel method

BS 8204-3 "Mortar layers, substrates and cast-in-place floors. Polymer modified cementitious levelling mortars and abrasion resistant mortars.

BS AU 178a "Specification for safety glazing for road vehicles

BS EN 13672 "Sports field surfaces. Determination of the abrasion resistance of non-infilled artificial turf

BS EN 60903 "Gloves for working with electricity on insulating materials

CFFA-1 & 200 "Standard Test Methods. Chemically coated fabrics and films

CFFA-P-101C "Recommended Minimum Performance Standards for In-Ground Vinyl Swimming Pool Liners

CID A-A-56032 "Military Specification - Epoxy-based Inks, Markings

CID A-A-59776 "Fire Fighting Equipment

CNS K6591 "Test Methods for Polyurethane Athletic Device Materials

CPA WR-01 "Standard Test Method for Evaluating the Abrasion Resistance of Laminated Decorative Surfaces by Abrasive Wheels

CTS No. 5538《Abrasion Resistance Taber Abrasives

DIN 52 347 "Inspection of Glass and Plastics. Abrasion test. Method of using wear wheels and measurement of scattered light

DIN 53 109 "Inspection of paper and cardboard. Determination of wear by means of the wear wheel method

DIN 53 754 "Inspection of plastics. Determination of abrasion resistance by abrasive wheels

DIN 53 799 "Aminoplastic resin-based decorative laminates. Test Methods

DIN 68 861 T2 "Furniture surfaces: Wear behaviour

DLA1 "Determination of the abrasion resistance of surfaces

DPS 11.04 "Hard Anodized Aluminum

EN 13310 "Kitchen sinks. Functional requirements and test methods

EN 13329-Annex E "Laminate floor coverings. Surface layer components based on lambda plastic thermosetting resins. Specifications, requirements and test methods

EN 13696 "Wooden flooring. Test methods for determining elasticity, abrasion resistance and impact resistance

EN 14323 "Test method for melamine panels for interior use

EN 14327 "Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather

EN 14354 "Manufactured panels - Wood veneer floor coverings Annex D

EN 14354-Annex D "Wood-based panels. Wood veneer floor coverings

EN 14431 "Enamels and Vitreous Enamel. Characteristics of enamel coatings on steel sheets for construction

EN 14688 "Sanitary equipment. Washbasins. Functional requirements and test methods

EN 14864 "Glass and porcelain with glass fibre coating

EN 14904 "Playing field surfaces. Specification for Indoor Surfaces for Multi-Sports Fields

EN 438-2 "High pressure laminated sheets for decorative purposes HPL. Thermoset resin-based sheets. Part 2: Determination of properties

EN 655 "Resilient floor coverings, Specification for cork PVC wear layers for tile attachment compositions

EN 660-2 Resilient Floor Coverings - Determination of Abrasion Resistance - Part 2: Frick-Tabor Test

FDA Metallic Plasma Sprayed Coatings "Industrial Guidelines for the Testing of Metallic Plasma Sprayed Coatings on Orthopedic Implants

Fed. Specification TT-P-0091D "Interim Federal Specification for Butylene-Based Rubber Coatings on Concrete Floors.

Fed. Test Method Std. No. 191A Method 5306.1 "Abrasion Resistance of Cloth: Rotating Platform, Double-Head Taber Method

Fed. Test Method Std. No. GG-P-455b "Photographic Plate and Foil Sensitized Anodized Aluminum".

IKEA Spec. No. IOS-TM-0002 "Surface Resistance Test Method

IPC-TM-650 "Wear Taber Weld Cover and Conformal Coating

ISO 10074 "Technical Conditions for Hard Anodized Coatings of Aluminum and its Alloys

ISO 15082 "Test Methods for Rigid Plastic Safety Glass for Road Vehicles

ISO 2046-Annex C "Effect of Surface Finish and Color on Scratch Resistance

ISO 24338 "Laminate flooring - Determination of resistance to abrasion

ISO 3537 "Road vehicles. Safety glazing materials. Mechanical Tests

ISO 5470-1 "Rubber or plastic coated fabrics. Determination of resistance to abrasion

ISO 7784-1 "Paints and varnishes. Determination of abrasion resistance

ISO 7784-2 "Paints and varnishes. Determination of abrasion resistance

ISO 9352 "Plastics. Determination of abrasion resistance of grinding wheels

JC Penney - MTC-205 "Abrasion Resistance of Textiles by Double Abrasive Wheel Rotary Abrasion Method

JC Penney - PPS# 303-03076 "JCPenny Products Research and Technology Laboratory Product Performance Standard PPS 303-0307

JIS A 1453 "Abrasion Test Method for Building Materials and Some Building Structures by Sandpaper Method

JIS H 8503 "Test Method for Abrasion Resistance of Metal Coatings

JIS K 5600: Part 5, Section 8 "Test Method for Coatings Part 5: Mechanical Properties of Thin Films Section 8: Abrasion Resistance Rotary Sandpaper Covering Wheel Method

JIS K 5600: Part 5, Section 9 "Test Method for Coatings, Part 5: Mechanical Properties of Thin Films, Section 9: Abrasion Resistance Rotating Abrasive Rubber Wheel Method

JIS K 6735 "Types, dimensions and properties of plastic polycarbonate sheets

JIS K 6902《Test method for laminated thermosetting decorative sheets

JIS K 7204《Test method for abrasion resistance of plastics by abrasive wheel method

JIS K 6264 "Determination of Abrasion Resistance of Vulcanized Rubber or Thermoplastic Rubber Part 2: Test Method

JIS L 1018《Test method for knitted fabrics

JIS L 1021 "Textile Floor Coverings. Part 11: Determination of Abrasion

JIS L 1085 "Test Methods for Nonwoven Interlayer Fabrics

JIS L 1096《Test for Woven Fabrics

JNB 30.04.09 "Abrasion resistance of printed graphics".

LAT-4-2200 "Hard Anodizing

MIL-A-8625F1 "Military Specification. Anodic Coating of Aluminum and Aluminum Alloys

MIL-C-83409 "Military Specification - Coatings, Goggles, Polycarbonate, Flight Helmets

MIL-DTL-15024F, "Military Specification. Equipment identification plates, labels and straps

MIL-DTL-19834C "Adhesive-lined metal foil identification or description plate. General Specifications

MIL-DTL-22992F General Specification for Heavy Duty Electrical Waterproof Quick Disconnect Connectors, Plugs and Receptacles

MIL-DTL-43511D "Detailed Specification. Polycarbonate Flight Helmet Visors

MIL-P-18493 "Military Specification - Carbon Fillers, Finished Fillers; and Carbon Materials, Fillers

MIL-PRF-24613A "Performance Specification. Deck Covering Materials, Interior, Decorative Polymers

MIL-PRF-24712A, "Military Specification. Powder Coated Metric

MIL-PRF-28800F "Military Specification. General Specification for Test Equipment for Electrical and Electronic Equipment

MIL-PRF-32170A, "Performance Specification. Abrasion Resistant Deck Tiles

MIL-PRF-32171B Performance Specification for Highly Durable Deck Coatings

MIL-STD-13231C "Department of Defense Standard Implementation Procedure - Marking of Electronic Products

MIL-T-53029C, Military Specification - Collapsible Water Tanks, Fabric: 10,000, 20,000, and 50,000 Gallons, Potable Water

MIL-V-43511C "Military Specification. Polycarbonate ballistic face shield, flight helmet

NALFA LF-01 "Laminate Wood Flooring

NASTA Textbook Manufacturing Standards and Specifications

National Aircraft Standard NAS 1192 "Performance Specification for Hard Anodized Coatings on Aluminum Alloys

NEMA LD3《High Pressure Decorative Laminate

NF G 37-121《Determination of abrasion resistance of rubber or plastic coated fabrics by rubbing with two abrasive wheels

NF T30-015《The abrasion resistance test of paint

NHDOT Section 711《preformed reflective pavement marking tape

NHTSA 49 CFR 571.205 "Glass Materials

NIOSH CET-APRS-STP-0316 Standard Test Procedure for Determination of Haze, Light Transmission and Wear Characteristics of Major Lens System Materials for Full Facepiece Respiratory Protection Devices RPS

No. IOS-TM-0002 "Surface Resistance Test Method No. 9

NSF/ANSI 35 "High-pressure decorative laminate for surface treatment of food service equipment

NSF/ANSI 49 "Secondary Laminar Flow Biohazard Cabinets

NSF/ANSI 51 "Food Equipment Materials

SAE AMS 2438 "Chromium Coating: Thin, Hard, Dense Deposits

SAE AMS 2469G "Aluminum and Aluminum Alloy Hard Anodic Coating Process and Performance Requirements

SAE J 1530 Test Methods for Determining Fiber Loss Resistance, Wear Resistance, and Bearing Resistance of Automotive Carpet Materials

SAE J 1847 "Wear Resistance Test. Vehicle exterior graphics and pin stripes

SAE J 2394 "ABS Power Seven-Core Cable

If you need more information about Taber Rotary Abraser, please send a message to QINSUN Instruments online.

2022-08-22 11:11