Actual operation steps of artificial accelerated xenon lamp aging test chamber
Actual operation of artificial accelerated xenon lamp aging test chamber A truly useful artificial accelerated xenon lamp aging test chamber should be able to provide all the exposure conditions required for testing, while also considering its actual usage situation. In addition, if a xenon lamp test chamber, no matter how advanced its technology is, is difficult to use, purchase, operate, and maintain at a high cost, it cannot be considered useful.
1. Sample Capacity and Floor Area
The artificial accelerated xenon lamp aging test chamber has a small volume, but its testing room has a large capacity.
Its exposed area is 501 square meters (3232c square meters), which is more than similar areas; Construction; The rotating drum test chamber has nearly 50% more exposed areas.
2. The sliding out sample tray of the artificial accelerated xenon lamp aging test chamber is much easier, more flexible, and more flexible than the rotating drum block.
According to the disk, it can accommodate flat plates or three-dimensional samples of different sizes, such as components, bottles, and test tubes. The flat sample tray can also be helpful for testing materials that flow during temperature rise, substances exposed to petrochemical trays, and storage tanks in rooftop applications. The rotating drum test chamber can only perform vertical testing on flat plates. Special fixtures must be used to hang the sample on the exposed clamp.
3. Maintenance
The manual accelerated xenon lamp aging test box is easy to maintain, and the installation and replacement of the lamp tube are very convenient, and its filter does not need to be replaced.
Regular maintenance and protection can be carried out from the front of the equipment. In the rotating drum type test chamber, it is inconvenient to replace the water-cooled lamp tube and filter, and the test sample must be moved away for routine lamp tube and filter replacement.
2024-03-25 14:46