How to adjust the ozone concentration in the ozone aging test chamber?

The ozone aging test chamber is a kind of equipment commonly used to test the aging performance of materials in an ozone environment. When conducting ozone aging tests, it is very important to control the ozone concentration in the test chamber. This article will introduce in detail how to adjust the ozone concentration in the ozone aging test chamber, including adjusting the ozone generator, controlling the intake speed, and adjusting the temperature of the test chamber.

Your location: Ozone Aging Test Chamber> News Center> Technical Articles> How to adjust the ozone concentration in the ozone aging test chamber How to adjust the ozone concentration in the ozone aging test chamber 2023-06-08 14:21

The ozone aging test chamber is a kind of equipment commonly used to test the aging performance of materials in an ozone environment. When conducting ozone aging tests, it is very important to control the ozone concentration in the test chamber. This article will introduce in detail how to adjust the ozone concentration in the ozone aging test chamber, including adjusting the ozone generator, controlling the intake speed, and adjusting the temperature of the test chamber.

How to adjust the ozone concentration in the ozone aging test chamber

Section 1: Adjusting the Ozone Generator

The ozone generator is the core equipment to adjust the ozone concentration in the ozone aging test chamber. The operation steps to adjust the ozone generator are as follows:

1. Make sure the oxygen supply system of the ozone generator is working properly. Check the oxygen supply pipeline, gas source pressure, etc. to ensure that the ozone generator can operate normally.

2. Adjust the ozone output of the ozone generator. According to the needs of the test, adjust the ozone output of the ozone generator to control the ozone concentration. It can be realized by adjusting parameters such as the current of the ozone generator and the flow rate of oxygen.

3. Monitor the working status of the ozone generator. Regularly check the operation of the ozone generator, including the monitoring of parameters such as current and oxygen flow, to ensure the normal operation of the ozone generator.

Section 2: Control Intake Speed

Adjusting the air intake velocity in the ozone aging test chamber is another important factor in controlling the ozone concentration. Here's how to adjust the intake speed:

1. Adjust the intake valve. There is usually an air intake valve in the ozone aging test chamber, and the air intake speed is controlled by adjusting the opening of the valve. The larger the opening, the faster the air intake speed, and the corresponding increase in ozone concentration.

2. Consider the tightness of the test box. The tightness of the test chamber is very important to control the intake velocity. Ensure that the test chamber is well sealed to reduce the entry of outside air, thereby stably controlling the ozone concentration.

3. Monitor the air intake speed. By monitoring the intake velocity in the ozone aging test chamber, the opening of the intake valve can be adjusted in time to achieve the required ozone concentration.

In the ozone aging test, it is very important to adjust the ozone concentration in the ozone aging test chamber. Through reasonable operation methods, precise adjustment of ozone concentration can be realized. At the same time, it is also necessary to pay attention to the adjustment of other factors, such as sample placement and air flow. By comprehensively adjusting these factors, the accuracy and reliability of the ozone aging test can be ensured.

2023-08-15 09:50