How to Master ici pilling and snagging friction testing machine?

The ici pilling and snagging friction testing machine is an instrument used to evaluate the pilling performance of fabric surfaces and its operation is relatively simple and not difficult to master.

The following are the general steps for using the ici pilling and snagging friction testing machine:

1. Prepare the sample: The fabric sample to be tested is cut to the appropriate size according to the standard requirements.

2. Adjust the instrument: According to the test requirements, select the appropriate test head and load, and install it on the testing machine. Then, adjust the initial position of the friction head and test parameters, such as friction force, rotation speed, etc., according to the instructions.

3. Conduct the test: Place the sample on the test bench and start the tester according to the instruction manual. During the test, observe the pilling of the sample surface and record the test data.

4. Analyze the results: Based on the test data, calculate the pilling grade of the sample surface, and analyze and compare.

When using the ici pilling and snagging friction testing machine, the following points should also be noted:

1. Safety precautions: When operating the tester, observe the relevant safety regulations, such as wearing appropriate personal protective equipment and avoiding touching the test head.

2. Sample selection: choose the right sample for testing, you can refer to the relevant standards or industry norms to ensure the accuracy and comparability of test results.

3. Control of test conditions: In the testing process, pay attention to the control of the environment and test conditions, such as temperature, humidity, etc., to ensure the reliability of the test results.

4. Processing of data: After the test is finished, the test data should be processed in time and statistically analyzed for further comparison and evaluation.

In short, to master the use of ici pilling and snagging friction testing machine, you need to carefully read the relevant instructions and standard requirements, and to carry out the actual operation and practice, and constantly accumulate experience and skills, in order to be able to use the instrument proficiently and get accurate and reliable test results.

2023-05-22 13:28