Xenon lamp aging tester humidification device common problems

Xenon lamp aging tester humidification function is mainly the use of humidifier, so in general encounter xenon lamp climate test chamber humidity is unstable, there may be equipment humidifier problems, QINSUN instrument R & D engineers below to introduce the humidifier common problems and solutions, I hope it will help customers.

1. humidifier water tank is not enough.

Answer: Add water. Remove the steam pipe, lift the water tank and base off, then invert the water tank, open the water filling lid, and then add a certain amount of water to the water tank. After the water filling is completed, tighten the water filling cap and check the water filling cap and spring valve. (Export) for dripping. According to the requirements of the pairing, the water tank will be placed on the bottom cover - the water tank and the bottom coincide.

2. xenon lamp aging test chamber of the vapor road connection is poor.

Treatment: place the humidifier on the ground behind the right side of the artificial climate box, and then insert the steam pipe into the gas production tube, with a special soft plastic tube to keep the steam pipe of the humidifier and the artificial climate box into the steam pipe > 3 ° angle, do not plastic pipe sagging or fold flat, so as not to block the steam path with water.

3. There is a circuit connection problem.

Treatment: Plug the electric plug into the socket on the right and rear side of the humidifier for use. The power supply to the humidifier is controlled by the artificial climate chamber to ensure that it is not to be wet.

In addition, if the xenon lamp aging test chamber control system problems, or humidification pump problems, then this situation needs to contact the manufacturer's technical staff to solve the problem, it is strictly prohibited to remove the test chamber for repair, so as not to cause irreversible damage to the instrument, while their own repair, in terms of peace will also be some problems. Therefore, report to the manufacturer for repair is a more effective solution.

Advantageous features.

1. The company has been engaged in testing instruments for more than ten years and has a strong after-sales service team;

2. Able to deal with all kinds of problems in time and quickly, to relieve customers of their worries;

3. Spare parts are available, to solve the trouble of ordering spare parts with long delivery time;

4. Provide outsourced maintenance services;

5. Supply all kinds of common testing instruments;

6. Keeping up with the update of industry standards and providing timely testing instruments in line with the new standards.

2023-01-09 12:00